Vehicle Magnet

12"x24" Vehicle magnet. Set of 2.

Click the 'Customize Now' orange button to set up your design. Once you are done, complete your order. 

If you are duplicating your design for re-order, you must click the GREEN button to edit or re-save your design before continuing.


WARNING:

IT IS JUST A MATTER OF TIME THAT A VEHICLE MAGNET WILL DAMAGE THE SURFACE THE MAGNET IS ATTACHED TO. MINOR VIBRATIONS OR RUBS WILL CAUSE THE MAGNET TO MOVE, CARRYING ANY SMALL PARTICLES TRAPPED UNDER THE MAGNET ALONG THE METAL SURFACE, POTENTIALLY SCRATCHING AND MARKING THE SURFACE. WE OFFER THE VEHICLE MAGNET PRODUCT AS A SERVICE AND YOU HAVE BEEN ADVISED OF THE POTENTIAL FOR DAMAGE FROM THE USE OF THIS PRODUCT. USE THIS PRODUCT AT YOUR OWN RISK AND JUDGEMENT.

Preparation - Before application
Select the location you wish to apply the magnet. It should be smooth and relatively flat with no non magnetic surfaces. There must be no protruding surfaces.
Make sure the paint, clear coat or wax are cured and hardened. If unsure, contact your dealer, automotive detailer or other automotive finishing professional.
Clean the surface with warm soapy water and once again with clean warm water to remove any soap. With a clean lint free cloth, gently pat dry.
For best magnetic adhesion, the temperature of the magnet and surface should be between 10 and 32 degree celsius.

Applying the magnet
Care must be taken to avoid any scratches or damage to your surface's finish.
Apply the magnet gently making sure there are no air bubbles, holes, rust, dents, oil or water under the magnet.
Do not drag or pull your magnet into position. If it is not in the proper location, gently remove the magnet and carefully reapply.
Do not apply the magnet if it is damaged, has bent corners, warped edges or any magnetic particles attached to the magnetic surface.
When in doubt, throw it out.

Do's and don't's
Do use common sense when apply the magnet. It can damage the vehicle surface if used carelessly or thoughtlessly.
Do not drive at high speeds and expect it to stay on or not slide down your vehicle scratching the surface.
Do not apply it over non-magnetic surfaces.
Do not leave it attached permanently as the sun will cause the area around the magnet to fade over time.
Do wash it and store it on a flat surface when not in use.
Do take advantage of it's long outdoor life by properly caring and maintaining it.

Vehicle Magnet

  • Product Code: 12x24
  • Availability: In Stock

Available Options

Laminate
A smooth clear self adhesive vinyl film that when applied to a second substrate (aluminum, white vinyl etc…), forms a surface to surface bond to help prevent moisture and grit from damaging the printed underlying graphics. Commonly used as a general purpose protective layer which can also contribute to a glossy appearance. Our standard laminate finish also helps to increase the UV protection of the printed vinyl prolonging the life of the printed item.



Related Products

Preflight

Preflight

Have our professional designers and production staff ensure your files meet the specifications for printing.One preflight per product must be purchased if you want preflight for all of your ordered products.If you only want preflight on particular pr..

Tags: Magnet

Powered by PitchPrint